Port-A-Cool PAC2K48EP Portable Evaporative Cooler with 48" diameter Fan - Mobile cooling for Hazardous or Highly-Combustible areas

Additional Photos
(click to enlarge)

Description

Operational cost for the Port-A-Cool PAC2K48EP Portable Evaporative Cooler is only pennies per day, a fraction of the cost of standard air-conditioning. It is also environmentally friendly since the cooling is accomplished naturally through the process of evaporation without the use of harmful refrigerants.

The 48" Belt Drive Hazardous Location Port-A-Cool PAC2K48EP evaporative cooler housing is built with rugged molded Polyethylene plastic for absolute protection from corrosion or rust and is both ETL & UL approved. This unit comes with 4" solid non-metallic caster wheels and ball bearings for easy movement and is built with exact specifications for facilities that require hazardous location equipment. The rugged conduit box, switches and wiring are all protected, along with the ridged conduit, hazardous location couplings and flexible cord with Class 1, Group C & D fittings. This unit is supplied with a 50 ft. power cord with no plug so that each user has a choice of plug variations. The water supply is obtained by simply connecting a standard 3/4" garden hose to the unit and is regulated by a float valve inside the internal reservoir. The fan blades are made of Polypropylene on a Nylon hub to prevent rust or corrosion. The 1/4 HP TEFC 110 or 220 VAC 4.4/2.8A 60 Hz., Class 1, Groups C & D pump disperses the water from the 25 gallon capacity internal reservoir throughout the resin treated corrugated fiber board K??L cooling pads. Each of the 6 pads have 37.5° fluted angles for maximum cooling efficiency even in high humid areas.

The rugged conduit box, switches and wiring are all protected, along with the ridged conduit, hazardous location couplings and flexible cord with Class 1, Group C & D fittings. This Port-A-Cool PAC2K48EP unit is supplied with a 50 ft. power cord with no plug so that each user has a choice of plug variations. The water supply is obtained by simply connecting a standard 3/4" garden hose to the unit and is regulated by a float valve inside the internal reservoir. The fan blades are made of Polypropylene on a Nylon hub to prevent rust or corrosion.

FACTS ABOUT PORT-A-COOL EVAPORATIVE COOLERS:

•  Environmentally Friendly - The units produce no fluorocarbons like traditional air conditioning or vapor compression systems. Using Port-A-Cool® units instead of vapor-compression systems also helps reduce global CO2, CFC, and other greenhouse gas emissions.

• Energy Efficient - Evaporative cooling systems used worldwide save some 60 million barrels of oil annually and 27 billion pounds of annual CO2 emissions in lieu of vapor compression air conditioning systems.

• Good for Indoor Air Quality - With superior fluting and manufacturing in Kuul® pads media, impurities are filtered out, producing cooler, cleaner indoor air.

• Easily Integrated - Port-A-Cool® units can be configured to become an energy efficient addition to an existing system.

• Available in a Variety of Sizes - Choose from four sizes of Port-A-Cool® electric units, three sizes of pneumatic units, or two sizes of hazardous location units.

• Inexpensive to Operate - Because energy consumption is so much less than traditional air conditioning, energy management is also more efficient.

• COOL! - Port-A-Cool® units can lower the surrounding air temperature up to 20 degrees F and actually generate cooled air!